您现在的位置: 天极网 > IT新闻

Countering challenges facing by building industry

国际文传 2018-04-17 12:01 我要吐槽

Building material, chemical and new energy industries are experiencing a push to transform and upgrade, as the Chinese government promotes eco-friendly buildings. At the same time, building plastics have become a key material in modern building construction, and are enjoying increasingly widespread applications due to their light weights, strong plasticity and high cost-performance ratios, reflected in more than 10 million tons of plastics consumed globally in building industries every year. In particular, non-toxic, harmless, and pollution-free green plastic building materials have become highly sought. Release of pollutants, energy consumption of materials, designed heat loss of buildings, recycling of materials, impact on water and air qualities, etc. all are needed to be taken into account when green plastic building materials are produced, thus driving continuous innovation in materials, production technologies and processes.

 

"Innovation is Key to the Future", theme of CHINAPLAS 2018, is architected around to provide practical, energy-efficient, eco-friendly, intelligent and innovative solutions to support the transformation of the building industry into one which is green and eco-friendly.

 

Challenges facing the industry

Despite the recent ups and downs of the real estate and building industries, new, burgeoning demands have been triggered by consumers' unrelenting pursuit of comfort, aesthetic appeal, safety, and durability. However, the weatherability of plastic building materials has been an issue for quite some time. Exposure to the external environment leads to degradation of many building materials and unless handled properly, great economic losses can be induced. Building materials need to withstand the challenge of outdoor weathering for a long period of time in order to have longer lifetimes.

 

Acrylonitrile Styrene Acrylate (ASA) - a copolymer of SAN and acrylic rubber to have its global launch by LG Chem at CHINAPLAS 2018, is a highly functional plastic with excellent weatherability that retains most of the advantages of ABS. Thanks to its excellent retention of physical properties and appearances after extended periods of outdoor exposure, it is used as a material for automobile exterior, construction and furniture finishing sheet, etc.

 

Nanjing PMT Pigment Tech., Co., Ltd. is a manufacturer of complex inorganic colour pigments(CICP) which are used in high-grade coating, plastics and building materials. PMT's CICP have excellent chemical resistance, outdoor durability, heat stability and light resistance properties. They are environmentally friendly, non-toxic, and possess high infrared reflectivity. Applications include RPVC, polyolefins, engineering resins, paints and coatings including general industrial, coil and extrusion coatings, etc.

 

To use plastic building materials, we need to consider not only the environmental impact caused by the choice of materials but also the choice of processing equipment to ensure the stability of the materials during production. Hangzhou Polytech Plastic Machinery Co., Ltd. will display a plastic glazed tile extrusion line, which consists of extruder, T-die and shaping downstream units, and can continuous extruding single layer PVC/PMMA and PVC/ASA composite multi-layer glazed tiles. Compared to ordinary plastic tiles, glazed tiles have much better appearances, better qualities, stronger durabilities and more special features, such as flame-proof, anti-corrosion, anti-freezing, good weather resistance, and colour retention, etc. Glazed tiles are widely used in garden-style factories, tourist scenic spots, pavilions, hotels, family buildings, etc.

 

There are some problems related to plastic building materials need to be dealt with during molding process. For example, plastics tend to get oxidized during processing and after being used for some time. Oxidized plastics are brittle and lack their original strength. As a result, anti-oxidation should be given a proper role in the formula.

 

The SONGNOX® 1330, to be displayed by Songwon China Limited, is a low volatility phenolic antioxidant with low polarity. Thanks to its extraction resistance in potable and hot water applications and its excellent line speed for BOPP film or PP raffia production. The SONGNOX® 1330 is very suitable for applications in HDPE potable water, hot water pipes (PE and rPP), BOPP film production and PP raffia production.

 

Building materials are moving towards high efficiency and eco-friendliness

Plastic building materials are gradually gaining popularity among consumers, which will lead to substantial increase in the demand for various plastic pipes, doors and windows, polymer waterproof materials, decoration materials, insulation materials and other construction plastic products. However, most of the new building materials products are still lacking high-tech, safety and eco-friendly elements, meaning that there is a lot of room for development towards the high-end, particularly in the plastic pipes and doors/windows industry. In other words, enterprises must pay close attention to technology advances, production efficiency, safety and eco-friendliness related to their products in order to increase their edge in the market. Visit CHINAPLAS 2018 and discover cutting-edge technologies may meet different needs.

 

The PP-R32SG dual strand high speed, G type pipe extrusion plant by Ningbo Fangli Technology Co., Ltd. has a full line equipped with “GRAEWE•FANGLI” brand configuration that guarantees speedy, stable extrusion. The high efficient single screw extruder ensures high output and quality of PP-R pipes. The combination of a low-pressure dual strand pipe head, a water-ring, and a disc combination calibrator provides high production speed capability. Power consumption is 30% less than traditional single pipeline.

 

Beijing Rich Originality Packing Machinery Co., Ltd. has developed an automatic straight pipe packaging production line with counting, feeding, shaping, packing, packaging, sealing, weighing, palletizing, etc. all being automated.

 

Guangdong Liansu Machinery Manufacturing Co., Ltd. will present PVC high-efficient parallel twin-screw extrusion line at CHINAPLAS 2018. It is equipped with an ultra-efficient parallel twin screw extruder and can save more than 20% energy compared with the traditional conical twin screw extruding production line due to its unique ultra-efficient motor and screw mechanism. It is also equipped with fully-automatic powder feeding and pipe packaging devices, realizing the complete automation of the production of PVC pipe from upstream to downstream in the entire process.

 

One of the basic characteristics of green building materials is their recyclability, which eliminates pollution to the environment caused by wastes. Recycling is generally carried out through direct reuse or modification of material. It is anticipated that modification will gradually take over and become the dominant recycling method.

 

Zhangjiagang Xinbei Machinery Co., Ltd. will introduce plastic board shredder, specially designed for plastic boards, with a maximum shredding length of 2 metres. A range of models is available, and the one on show this time is an 800mm model, meaning that the shredding width of boards is 800mm. The machine is also suitable for shredding all kinds of other plastic wastes, like pipes, lumps, barrels, films, jumbo bags, etc.

 

A comprehensive platform for technology interflow

CHINAPLAS 2018 will take place in Shanghai on 24 - 27 April 2018 in a new venue - National Exhibition & Convention Center (NECC), Hongqiao, Shanghai, PR China. As one of the few platforms that cover all the processes of the plastics and rubber production chain and downstream industries, the show includes everything from raw materials to technology and even to services. Over 1,200 materials suppliers and more than 4,200 machines suppliers will be congregated, with more than 900 internationally renowned companies exhibiting solutions for the building industry. They include plastic raw materials and equipment suppliers like KraussMaffei, BATTENFELD-CINCINNATI, Brückner, Jiangsu Cenmen Equipment, Haitian, Arburg, Engel, Jwell, Zerma Machinery, Fangli, Guangdong Liansu, BASF, Dow, Lubrizol, DuPont, Borouge, Sabic, SCG, LG Chem, Toray, Jiangxi East Huge Dragon, Akzo Nobel, Americhem, BYK, etc. CHINAPLAS 2018 will be replete with the essentials for the plastic building industry to transform and go green - advanced plastic materials, additives, equipment and processing technologies, such as antioxidants, ASA powder, waste plastic shredders, wood-plastic profile production lines, multi-layer co-extrusion technology, automatic packaging equipment, plastic glazed tile extrusion lines, window profile technology molds, etc.

 

Every year, the show is visited by well-known enterprises and associations from the plastic building materials industry covering plastics profile, plate, and rolls enterprises include: Weixing NBM, Zhongcai Profile, China Lesso, Henan Swan Profile, Xi’an Gaoke, Shanghai White Butterfly Pipe, Xiamen Runner, Wuhan Kingbull, Oriental Yuhong, Fujian Mingguan Plates, Rifeng, Xinjiang Blue Ridge Tunhe Profiles , CWPCU, China Construction Metal Structure Association PVC Doors and Windows Committee, etc.

 

For walk-in visitors, RMB 50 and RMB 80 will be charged for a one-day pass and a four-day pass respectively. Visitors can enjoy admission discount through online pre-registration from now till April 18, 2018, at an early-bird rate of RMB 50 for a four-day pass. To pre-register now, please visit www.ChinaplasOnline.com/prereg. For more information about CHINAPLAS 2018, please visit www.ChinaplasOnline.com.

 

**The End**

Issued by Adsale Exhibition Services Ltd.

For media inquiries, please contact:

Hong Kong:Ms. Stella Yuen

Tel:(852) 2516 3316      

Fax:(852) 2516 5024

Email:Chinaplas.pr@adsale.com.hk

Official Website:www.ChinaplasOnline.com
 

About CHINAPLAS 2018

CHINAPLAS 2018 is organized by Adsale Exhibition Services Ltd. and Beijing Yazhan Exhibition Services Ltd. and co-organized by China National Light Industry Council - China Plastics Processing Industry Association, China Plastics Machinery Industry Association, Messe Düsseldorf China Ltd., the Plastic Trade Association of Shanghai. The event is also supported by various plastics and rubber associations in China and abroad.

 

 

First introduced in 1983, CHINAPLAS has been approved by UFI (The Global Association of the Exhibition Industry) since 2006. CHINAPLAS is exclusively sponsored by the Europe's Association for Plastics and Rubber Machinery Manufacturers (EUROMAP) in China for the 29th time. CHINAPLAS is currently Asia's No. 1 plastics and rubber trade fair.

作者:国际文传责任编辑:IFX)
评论
* 网友发言均非本站立场,本站不在评论栏推荐任何网店、经销商,谨防上当受骗!
今日更新
1区块链在版权保护上的独到之处
区块链版权

  网络传播的高效让内容生产者有了更多的曝光机会,同时也使得剽窃成本降…

2iOS 12添70余款emoji表情符号
iOS 12表情

正值Emoji世界表情符号日,苹果公司又为即将推出的iOS 12系统带…

3抖音全球月活跃用户数突破5亿
大公司晨读

抖音宣布了最新用户数据:全球月活跃用户数超过5亿。这是抖音首次公布全球…

4大公司晨读:谷歌将获最大罚单
大公司晨读

由于在自家安卓系统中存在垄断行为,谷歌将于下周受到欧盟的罚款。

5赴港上市的中国互联网企业们
再迎IPO热潮

最近中国的互联网公司突然迎来一波“上市潮”,背后究竟是什么原因。

热门文章
1大公司晨读:小米股票持续上涨
大公司晨读

ofo在澳大利亚地区由于运营不利,于前日宣布将关停澳洲地区的单车业务。

2滴滴借助人工智能重新定义交通
滴滴

2018RISE,滴滴联合创始人兼首席技术官张博发表“借助人工智能重新…

3下月起话费账单将按月推送短信
话费账单

工信部要求基础电信企业从下月起以短信方式按月向用户主动推送通信账单信息…

4华为正秘密开展达芬奇计划
华为D计划

日前,华为拥有NPU单元的麒麟970芯片和GPU Turbo技术,正当…

5积木易搭火爆广州建博会
积木易搭参展

6CSS 2018峰会将于8月27日举行
CSS 2018峰会

第5届全国互联网安全峰会将于下月27日举行,峰会邀请了来自国内外的安全…

7大公司:华为“达芬奇计划曝光
大公司晨读

华为“达芬奇计划”首次曝光,该计划将把AI带入华为所有的产品和服务中。

8赴港上市的中国互联网企业们
再迎IPO热潮

最近中国的互联网公司突然迎来一波“上市潮”,背后究竟是什么原因。

9京东、阿里抢占无人送货市场
无人送货市场

不久前,京东发布一段关于无人配送的视频,正式公布了一个无人配送而且可以…

10抖音全球月活跃用户数突破5亿
大公司晨读

抖音宣布了最新用户数据:全球月活跃用户数超过5亿。这是抖音首次公布全球…